6 REVIEWS
The XTZ Cinema M6 Center is a high-performance center channel speaker designed to anchor the front soundstage with pinpoint clarity rich vocal presence and wide dispersion. Tuned to match the rest of the Cinema Series it integrates seamlessly into M6-based systems and excels in both single- and multi-seat listening environments.
Its six-driver layoutfeaturing a Quad Tweeter Array and dual 5.25 woofers in an MTM (MidwooferTweeterMidwoofer) configurationdelivers high output with low distortion and focused horizontal coverage making dialogue intelligible and immersive across the entire room.
30-Day Money Back Guarantee
Lifetime Customer Support
Including VAT (0%) $0.00
undefined
Currently unavailable
Hex Tweeter Array for Wide Dispersion
Cinematic base down to 58Hz
Extremely High SPL With Low Distortion
MTM Design results in less vertical reflections
Low 1.2 kHz Crossover for Clean Midrange Response
Wall-Mount or Cinema Stand Compatible
Quad tweeter midrange array
The Cinema M6 Center uses a Quad Tweeter Array with four 1" silk dome drivers. Reinforced silk diaphragms and neodymium motors with copper shorting rings deliver flat, detailed sound at high output levels. Each tweeter sits in a die-cast chamber for thermal control and low resonance.
Smooth midrange integration
The Quad Tweeter Array covers frequencies starting at 1200 Hz, which is unusually low for a tweeter. This ensures natural midrange integration and resolves typical phase issues found in the critical 2 to 6 kHz range.
Clean sound in real rooms
The Quad Tweeter Array offers controlled directivity across the horizontal axis without creating a narrow beam. It reduces early reflections from side walls and limits floor and ceiling reflections, maintaining clarity and focus even at high playback levels.
Even sound across every seat
A multi tweeter array delivers balanced dispersion across the full frequency range, creating a wide and even sound field. This is key in a cinema setup, ensuring clear dialogue whether you're seated in the center or off to the side.
High output, low distortion
With four tweeters sharing the load, each works within its optimal range. This enables the M6 to produce high SPL with minimal distortion or fatigue.
Fast, dynamic response
The small, lightweight diaphragms respond instantly to transients, delivering greater clarity and dynamics than traditional midrange drivers—especially noticeable in voices and subtle effects.
The M6 Center uses two 5.25" long fiber pulp cone drivers in a D’Appolito (MTM) arrangement. These custom woofers combine low mass with high stiffness for exceptional impulse response and low distortion, even at elevated listening levels.
D’Appolito (MTM) layout
Improves vertical dispersion control, reduces floor and ceiling reflections, and minimizes phase issues between drivers.
Long fiber pulp cones
Combine low mass and rigidity for fast, controlled low end response.
Powerful motor system
Neodymium magnets with aluminum shorting rings deliver clean, high output performance.
The Cinema M6 is designed to deliver outstanding sound quality right out of the box, thanks to its exceptionally linear frequency response. This neutral tuning makes it an ideal foundation for room-specific digital signal processing (DSP), ensuring precise and customizable performance in any environment.
The M6 Center uses a 2.5 way crossover with filter points at 1200 Hz and 3000 Hz. Steep 24 dB slopes on all drivers minimize phase interaction and preserve balance across the frequency range. Premium components are used throughout for low distortion and long term stability.
2.5 way crossover: 1200 Hz / 3000 Hz
Maintains control and coherence between woofer, tweeter, and high treble bands.
24 dB/octave filter slopes
Minimizes overlap and distortion while keeping each driver in its optimal range.
Premium passive components
Air core and steel core coils, MKP capacitors and low induction resistors provide stability and long term reliability.
The cabinet uses thick High Density Fiberboard (HDF) and internal bracing for rigidity and low resonance. Its trapezoidal form reduces internal standing waves, and the front baffle is angled 7.5 degrees to direct sound toward the listening area when placed under a screen.
Rigid HDF construction with internal bracing
Minimizes resonance and structural vibration.
Trapezoidal design with 7.5 degree angled baffle
Reduces standing waves and angles sound toward the listening area.
Matte black, low reflective finish
Eight layers of anti reflective coating reduce visual distraction in dark rooms.
Magnetic grille
Provides tool free protection with acoustic transparency.
The rear panel of the M6 Center features built in keyhole slots for quick and tool free wall mounting, as well as recessed threaded inserts that offer even greater versatility. These are compatible with the optional Flushmount Kit or a standard VESA 75 mounts.
Flushmount Kit compatible
Supports tight to wall installation with 15 mm cable clearance.
Built in keyhole slots
Enable fast wall mounting without additional hardware.
Threaded inserts
Compatible with any VESA 75 brackets
An optional stand is available for placing the M6 at ideal height when wall mounting isn’t possible. Designed to match the Cinema Series visually and mechanically, the stand features a matte black finish, internal cable routing, and the ability to fill the column with sand for added mass.
Custom fit for Cinema M6
Top plate aligns with insert pattern on the speaker base.
Integrated cable management
Conceals wires inside the column for clean installation.
Sand fillable design
Increases stability and dampens vibration on solid or carpeted floors.
Jag blev med hus på ålderns höst (48) bio va självklar utrymme fanns och satte igång (håller på fortfarande har den som hobby så jag undrar om den nånsin kommer bli klar) När jag skulle köpa hårdvaran så va valet enkelt xtz har lyssnat på mängder av märken i varierande prisklasser och fastnade helt på xtz ljud utseende och inte minst pris oslagbart. det blev s6 front o center s5 surround och back surround s2 i taket och definitivt inte minst 2 st 3x12 subbar känslan att kunna trycksätta ett helt rum nåja 25m2 så att känslan påminner om att sitta i en bil och lyssna samma tryck men mer luft oslagbart är ordet jobbar nu med akustiken för att kunna få till klangen i rummet det är mycket att lära sig om akustik men fascinerande. Rekomenderar verkligen alla att lyssna på xtzs högtalare och slutsteg innan man märkeshandlar sa jag att de är ju jt fräcka att se på och det är ju inte fel. Matte Västerås
I have the Cinema M6 in operation in a surround setup including S5 and 1X12 since one year and have to say that I never heard a better home cinema setup than mine. The M6 is able to play extremely clear but still never annoying. Especially for center speakers this ability is the most important for me. I love the details but I hate annoying sound. This balance is really great with the M6.
I own the following Set: Front Cinema M6 Center Cinema M6 Center Surround Cinema S5 Subwoofer Cinema 1X12 I can simply say that this set has an awesome performance. Super sound for little money. The speakers offer a very brilliant and detailed sound. The maximum dnamic capabilities are just amazing! Of course they require a subwoofer since they are too small to perform deep bass. Thus the 1X12 is a perfect complement to the Cinema speakers. It plays very deep but still punchy and controlled. The only thing I do not like is the glossy front of the speakers. I want to see the drivers so I use them without the cover. I would have preferred a matte front.
I have the Cinema M6 in operation in a surround setup including S5 and 1X12 since one year and have to say that I never heard a better home cinema setup than mine. The M6 is able to play extremely clear but still never annoying. Especially for center speakers this ability is the most important for me. I love the details but I hate annoying sound. This balance is really great with the M6.
It took me quite a long time and lots of testing before I decided whhich speakers my new home cinema shall be equipped with. Finally I decided for XTZs cinema series (3 x M6 2 x S5 2 x 1X12 4 x S2). For me this is a perfect blend of price / performance and compromise in film and music. The M6 provide a great front with absolutely clear and clean voices. One cannot hear where the speakers are standing since they create a really good soundstage. The surround is done by the S5 which really do a great job in creating the feeling that you are part of the movie. One really feels completely surrounded. I use them in the Dipole 3X mode. Its a bit sad that there is only so few native 3D sound sources out there. The S2 do a great job even when the sound is only upscaled but I guess they can do much more than they have to do right now. With the 2 1X12 the bass is really accurate and precise. They play really deep and can play very loud if necessary. That is pure fun :D. Thanks to you guys for that great system!
I own the following Set: Front Cinema M6 Center Cinema M6 Center Surround Cinema S5 Subwoofer Cinema 1X12 I can simply say that this set has an awesome performance. Super sound for little money. The speakers offer a very brilliant and detailed sound. The maximum dnamic capabilities are just amazing! Of course they require a subwoofer since they are too small to perform deep bass. Thus the 1X12 is a perfect complement to the Cinema speakers. It plays very deep but still punchy and controlled. The only thing I do not like is the glossy front of the speakers. I want to see the drivers so I use them without the cover. I would have preferred a matte front.
XTZ sells directly to you without any middlemen. This means you get more of everything for your money: better components, better design, better engineering and as a result, a speaker to be proud of.
We are fully aware that a speaker reflects the character of the environment that it is in. As such, we offer a refund within 30 days if you are not satisfied with your purchase (see terms below).
Subscribe to get the latest news and special offers.
